AKCP WTG, Quick Start Manual, Page: 13 / 48

WTG QuickStart Guide
- 13 -
Search
The wireless search method can be used to automatically find a wireless sensor.
Click
Add Wireless Device then click on the Search button on the lower left corner.
Press and hold the button on the wireless sensor until the LED begins to blink (SETUP mode).
After it’s detected, click on
Add to add it to WTG.
Note: make sure that your wireless sensor is in RUN mode in order to complete the sensor pairing:
press and hold the sensor’s button for 1-2 seconds. The wireless sensor’s LED will light up briefly.