AKCP WTG, Quick Start Manual, Page: 3 / 48

WTG QuickStart Guide
- 3 -
A) How to first power on the unit and get access to the WebUI
To access and configure the WTG unit, two methods are supported:
1. Traditional wired connection (LAN): fast and easy setup
2. WiFi connection: slower but still convenient setup
After the initial connection, both methods will
provide access to the unit’s WebUI for further
configuration.
Wired setup
Connect a network (LAN) cable to the unit’s Ethernet port and power on the unit.
Using a PC or laptop, configure your network card’s IP with IPv4 address:
192.168.0.200
Connect the WTG directly to your PC or laptop’s network card with a crossover cable.