AKCP WTG, Quick Start Manual, Page: 45 / 48

WTG QuickStart Guide
- 45 -
Graphing
You will need to manually enable graphing collection for any virtual sensors one by one.
For wireless sensors, the graphing is automatically enabled
– but to be able to see the collected
graph data, you will need graph license.
The supported graph features are the same as on our sens family units.
The wireless sensor graph collection period settings are set on
each sensor’s settings page (sensor
value collection period):
Note: after making changes, you will need to re-sync the wireless sensor and any existing graph data
will be deleted!
Important : WTG supports up to 32 WTS sensors graph, including multi-sensor WTS. For example,
on WTS-TH there are both Temperature & Humidity sensors.