ropeWater Detector
- 6 -
Detection of Acid
In power monitoring situations where backup battery and UPS are used to ensure a constant
power supply there is a risk of battery’s leaking harmful battery acid. Use this rope sensor
underneath backup battery banks to give advanced warning of battery acid leaks.
Note:
This product is designed for short term exposure to battery acid only. Tested with 40%
concentrate Sulphuric acid (H2SO4)
Mounting the ropeWater sensor
We recommend using any standard plastic U-clip or half U-clip with the adhesive base as shown
in these two pictures below. These types of clips can normally be found at your local hardware
store.
When installing or handling your new rope sensor, please be sure to handle the rope portion of
the sensor with care, avoiding any twisting, excessive bending or putting stress on the rope, as
the internal sensing wires are very delicate and can become damaged quite easily.