12
4.3 Remote Control
Power (
)
: Press to turn on and off.
Mute ( )
: Press to mute the sound.
Press again or press ◄, ► to restore
the sound.
0~9 Number Buttons
: Press 0~9 to
select a channel; the channel changes
after 2 seconds.
PIP
: Press to cycles through the
different POP or PIP modes, such as
Basic PIP, LR POP, and exit.
SOURCE
: Press to select the signal
source, such as TV, AV, S-Video,
Component 1, Component 2 or VGA.
PIP SIZE
: Press to cycle through the
PIP size, such as Large, Medium,
Small.
PIP POS
: Press to change the PIP
window position under PIP mode.
VOL +/-
: Press to adjust the volume.
CH +/-
: Press to scan through
channels. To scan quickly through
channels, press and hold down either
channels.
MTS
: Press repeatedly to cycle through
the Multi-channel TV sound (MTS)
options: Mono, Stereo and SAP
(Second Audio Program).
◄,▲,▼,►,
ENTER
: Press ◄, ▲, ▼,
► to move the on-screen cursor. To
select an item, press ENTER to
confirm. And it can also press ▲ or
▼ to scan through channels, press
◄ or ► to adjust the volume.
SYSTEM
: Press repeatedly to cycle
(Continued on next page)
REMOTE CONTROL
through the system options: AUTO, NTSC3.58 and NTSC 4.43.
MENU
: Press to enter into the on-screen setup menu, press again to exit.
V-CHIP
: Press to select the child protect mode.
CCD
: Press to select the Closed Caption mode.
FREEZE
: Press to freeze the picture, press again to restore the picture.
DISPLAY
: Press to display the channel information and it disappear after 3 seconds.
FAVORITE
: Press repeatedly to cycle through the favorite channel list.
