43
■
Using “Display Adjustment”
Press
MENU
, and then press or until the “Geometric” menu appears.
Press or to highlight the item.
Press “
ENTER
” to confirm for sub-selection as shown in the table below.
Press “
ENTER
” to confirm your selection.
Press to return.
Items
Description
Vertical
Position
Use “ ” or “ ” to select it and press “
ENTER
” to confirm.
Use “ ” or “ ” to move the image up or down.
Horizontal
Position
Use “ ” or “ ” to select it and press “
ENTER
” to confirm.
Use “ ” or “ ” to move the image left or right.
Table of Display Adjustment
■
Selecting Channel
Press
CH+/-
on the remote control to search the channels, the channel number will
increase or decrease by 1 for each pressing excluding the skipped channels.
Press number buttons 0~9 to select the corresponding channel content. If the
channel number is bigger than 9, just press the two number buttons successively. If
the channel number is bigger than 100, just press the three number buttons
successively. The time interval should not exceed 2 seconds.
If the channel number you pressed is bigger than the maximum channel number that
the setting is permitted, the maximum numbered channel content will be remained.
■
Channel Preview
Press RECALL button to switch between present channel and previous channel.
(Only for TV)
Press
MENU
, and then press or until the “Geometric” menu appears.
Press or to highlight the item.
Press “
ENTER
” to confirm and display a status bar as below.
Press to decrease the menu clock. Press to increase it.
Press “
ENTER
” to confirm and return.
