29
Pitch Up and Pitch Down
While playing a note, touching your thumb
to the Pitch-Bend Up or Pitch-Bend Down
plate shifts the note's pitch up or down.
Use the
Pitch Up
and
Pitch Down
tabs to
determine how EWI5000's Pitch-Bend Up
and Pitch-Bend Down plates work. Each
page has identical available parameters.
Sensitivity:
Use this slider to set the sensitivity of the Pitch-Bend plate.
CC (Continuous Controller):
You can set the Pitch-Bend plate to send a MIDI CC message.
•
CC Number:
Use this slider to set the CC number the Pitch-Bend plate will send when
you touch it.
•
Release:
Use this slider to set the CC value the Pitch-Bend plate will send when you stop
touching it.
•
Press:
Use this slider to set the CC value the Pitch-Bend plate will send when you touch
it.
