17
Effects Page
Reverb
Reverb
is a spatial effect, simulating the nuanced reverberation of sound in the space of a
particular room.
Amt (Amount):
Use this slider to set the Program's Reverb
Send level (the same as on the
Main
page). You can also set
this by using EWI5000's
Reverb
Knob.
Wet:
Use this knob to raise or lower the blend between the
"wet" (effected) and "dry" (unaffected) signal.
0%
is all dry,
and
100%
is all wet, while
50%
is an equal mix of both.
Damp:
Use this knob to adjust absorption of higher
frequencies as the reverbating sound decays over the time.
Width:
Use this knob to adjust the width of the stereo image
generated by the reverb.
Room Size:
Use this knob to set the size of the room that the
reverb will simulate.
