15
Envelope Controls
Amp Envelope
Delay:
Use this knob to set the amount of time
before the note starts.
Attack:
Use this knob to set how much time it
takes for the note's amplitude to ascend to the
Program's volume level.
Hold:
Use this knob to set how long the note will sound at the Program's maximum amplitude
(the Program's volume) before moving to the
Decay
stage of the envelope.
Decay:
Use this knob to set how much time it takes for the note's amplitude to descend to the
level of the
Sustain
parameter.
Sustain:
Use this knob to set the audio level of the note that the
Decay
stage will descend to.
Note:
EWI5000 does not use the Release stage of a traditional synth envelope.
Key > Decay:
Use this knob set how much the
Decay
value modulates based on the note
being played. The lower the note, the shorter the Decay time will be. The higher the note, the
longer the Decay time will be.
Key > Hold:
Use this knob to set how much the
Hold
value modulates based on the note
being played. The lower the note, the shorter the Hold time will be. The higher the note, the
longer the Hold time will be.
