AJAX GlassProtect Fibra, User Manual, Page: 15 / 29

If the detector is connected to the hub successfully, it will disappear from the list
of available devices.
Method 2: By alarm
Enable the Add Detectors by Alarm option above the list of detectors.
Trigger an alarm by simulating the breaking of glass:
After the alarm, the detector will move to the top of the list to the Recently
triggered devices category. The device will stay in this category for 5 seconds,
after which it will be moved back to the bus category.
To add a detector:
If the detector is connected to the hub successfully, it will disappear from the list
of available devices.
Device status updates depend on the Fibra settings; the default value is 36 seconds.
If you fail to add the detector, check the wire connection and try again. If a hub
already has the maximum number of devices added (for Hub Hybrid, the default
is 100), you will get an error noti cation when you add one.
1. Hit the glass with your st without breaking it. If the detector microphone
catches a low-frequency sound, the LED will blink.
2. Within 1.5 seconds after the impact, simulate the high-frequency sound of
glass breaking, for example, by tapping a metal object against a glass.
3. As soon as the detector reads the sound, it will turn off the LED for a
second.
1. Click on the device in the list.
2. Create a name.
3. Specify the room and the security group (if enabled).
4. Click Save .