AJAX GlassProtect Fibra, User Manual, Page: 14 / 29

To add detectors automatically:
After scanning the buses, the detectors will be displayed in the Devices tab.
The order of the devices will depend on which bus they are connected to.
By default, the device name includes the detector name and its identi er. To
connect the detector to the hub, edit the detector’s name, add it to a room and a
group if the group mode is enabled.
To check which detector you deal with, use any following methods: LED
indication and detector triggering.
Method 1: Via LED indication
In the list of available devices to add, click on any option. The LED of this
detector will start blinking after you press it. This way, you’ll know exactly which
detector you’re adding, how to name it, and which room and group it should be
assigned to.
To add a detector:
4. Select a room and a group if the is enabled. group mode
5. Click Add .
1. Open the PRO version of the app. Select the hub you want to add
GlassProtect Fibra to.
2. Go to the Devices tab and click Add Device .
3. Select Add Bus Devices . The hub will scan all buses. A list of devices
connected to the hub but not added to the system will appear on the screen.
The detectors are sorted by the buses they are physically connected to.
1. Click on the device in the list.
2. Create a name.
3. Specify the room and the security group (if enabled).
4. Click Save .