AJAX DoorProtect Plus Jeweller User Manual Download Page 25

system will send an appropriate noti cation to the Ajax apps, and the LED will
light up and go out gradually when the detector raises an alarm.

We recommend you replace the batteries immediately upon noti cation. It is
advisable to use lithium batteries. They have a large capacity and are less
affected by temperatures.

Technical speci cations

Detector actuation threshold

1 cm (small magnet)

2 cm (big magnet)

Sensor resource

2,000,000 openings

Tilt sensor activation threshold

5° or more (customizable)

Shock sensitivity

3 levels

Ignore  rst shock option

Yes

Tamper protection

Yes

Radio communication protocol

Jeweller

Radio frequency band

866.0–866.5 MHz 
868.0–868.6 MHz 
868.7–869.2 MHz 
905.0–926.5 MHz 
915.85–926.5 MHz 
921.0–922.0 MHz 
Depends on the region of sale.

Compatibility

Operates only with all Ajax 

, and 

Maximum RF output power

Up to 20 mW

Modulation of the radio signal

GFSK

How long Ajax devices operate on batteries, and what affects this

How to replace the batteries in the DoorProtect Plus detector

Learn more

hubs

radio

signal range extenders

Summary of Contents for DoorProtect Plus Jeweller




























Reviews: