AJAX DoorProtect Plus Jeweller, User Manual

Page: 13 / 27

Before selecting the sensitivity level, conduct
the
. If the detector
doesn’t react to shock in 5 cases out of 5 during
the test, the sensitivity should be increased.
Ignore Simple Impact
When this option is enabled, the alarm is
activated only if the sensor detects more than
one shock.
Tilt Sensor
When this option is enabled, the detector
detects a change in the tilt angle.
Tilt
Selection of the initial value of the tilt angle of
the detector. The sensor detects an alarm if the
tilt angle value changes.
Tilt Alarm Delay
The time from the moment the detector is tilted
to the alarm: 1 second to 1 minute.
Alert with a siren if opening detected
If this option is enabled:
are activated when DoorProtect Plus
detects opening.
Alert with a siren if an external contact is
opened
If this option is enabled:
are activated when a third-party
detector connected to DoorProtect Plus detects
an alarm.
This setting is displayed if the type of external
contact is External Contact.
Alert with a siren if roller shutter triggered
If this option is enabled:
are activated when the roller shutter
connected to DoorProtect Plus detects an
alarm.
This setting is displayed if the type of external
contact is Roller Shutter.
Alert with a siren if roller shutter is
disconnected
If this option is enabled:
are activated when the roller shutter
detector connected to DoorProtect Plus is
disabled.
High — there is no interference in the
protected area; the maximum sensitivity of
detection and the alarm detection speed are
important.
detection zone test
security system
sirens
security system
sirens
security system
sirens
security system
sirens