Signal Attenuation Test
Switches the detector to the Signal Attenuation
Test mode.
During the test, the power of the radio
transmitter is reduced or increased to simulate
a change in the situation at the object and
check the stability of communication between
the detector and the hub (or the radio signal
range extender).
User Guide
Opens DoorProtect Plus User Manual in the
Ajax app.
Temporary Deactivation
Allows the user to disable the device without
removing it from the system. There are three
options:
You can also separately con gure disabling of
the device:
The feature is con gured in the Ajax PRO apps.
Unpair Device
Unpairs the detector, disconnects it from the
hub, and deletes its settings.
No
— the detector is operating in the normal
mode.
Entirely
— the device does not execute
system commands or participate in
automation scenarios, and the system
ignores alarms and other device events.
Lid only
— the system ignores the detector’s
tamper button triggering noti cations.
By number of alarms
— the device is
automatically disabled by the system when
the set number of alarms is exceeded.
By timer
— the device is automatically
disabled when the recovery timer expires.
