Connection of a third-party wired detector
You can connect a wired detector with NC (normally closed) contact type to
DoorProtect Plus. It can be a motion, opening, or vibration detector.
DoorProtect Plus will not power the third-party detector. The detector should be
connected separately. To learn the type and input voltage of the third-party
detector, refer to the device documentation or contact the manufacturer’s
technical support.
Install the third-party detector no more than 1 meter away from DoorProtect
Plus. Increasing the length of the wire degrades the quality of communication
between devices.
To connect the third-party wired detector:
8.
Fix the detector and magnet to the mounting panels.
1.
Remove the detector from the mounting panel if already installed.
2.
Carefully break out the plugs in the detector enclosure for the output of
wires.
