OG-3G-AMA openGear Card v1.0 6
www.aja.com
DIP Switches
The OG-3G-AMA has an 8 position DIP switch accessible on the card. The
DIP switches can be used to configure the unit’s audio embedding and
disembedding, and to control ancillary data. When using DIP switches for
control, DashBoard displays only the Card and Status tabs and cannot be used for
configuration.
Figure 2. OG-3G-AMA DIP Switches
CONTROL
LOCAL
REMOTE
EMBED 1/2
ON
OFF
EMBED 3/4
ON
OFF
EMBED 5/6
ON
OFF
EMBED 7/8
ON
OFF
EMBED GROUP
1/2
3/4
DISEMBED GROUP 1/2
3/4
PASS HANC
ON
OFF
The exact functions of the DIP switch are described in
"DIP Switch Settings" on
page 11.
DashBoard Control System
The DashBoard Control System, created by Ross Video, provides a control
interface between Windows, macOS and Linux computers and the cards installed
in an openGear frame. DashBoard operates through TCP/IP communication
and requires an Ethernet connection between the controlling computer and an
openGear frame.
Details for acquiring and using the DashBoard Control System are provided in
"Using the DashBoard Control System" on page 13
.
Parts List
Quantity
Description
1
OG-3G-AMA Front Card in ESD bag
1
BNC Rear Card
8
WECO mating connectors, part number
107654-00
Installation
Summary
Installing an OG-3G-AMA card into a OG3 openGear frame consists of the
following steps:
• Install the Rear Panel onto the back of the frame corresponding to the slot pair
you will be using for the OG-3G-AMA card.
• Insert the OG-3G-AMA card into the frame in the right (even numbered) slot of
the pair.
• Connect the BNC and audio cabling to the Rear Panel.