manualshive.com logo in svg

AJA Ki Pro GO, Installation And Operation Manual, Page: 36 / 65

Share
Download
AJA Ki Pro GO Installation And Operation Manual Download Page 36

Ki Pro GO File Based Recorder/Player v1.0 36 www.aja.com

 

34.0 Playback Media Source

Selects which USB media will be used for clip playback. Only one clip can be 

played back at a time. Select from:

•  USB Port 1 (default), USB Port 2, USB Port 3, USB Port 4, or USB Port 5.

34.1 Playback Type

This parameter determines behavior during playback. Ki Pro GO will play all clips 

regardless of format or frame rate. 

All (default)

Clip

Plays the current clip and then continues playing the next clip on 

that Ki Pro GO media. 

Plays one clip and then stops playback.

NOTE:  If all clips are the same format and frame rate, they should play out smoothly 

one after another. If the formats or frame rates are different, the video may reset 

between clips.

34.2 Loop Playback

This parameter turns looped playback on and off.

On (default)

Off

Play clip(s) and then loop back and repeat playback.

Play clip(s) and then stop playback when complete.

Summary of Contents for Ki Pro GO


































































Reviews:

No comments