manualshive.com logo in svg

AJA Ki Pro GO, Installation And Operation Manual, Page: 29 / 65

Share
Download
AJA Ki Pro GO Installation And Operation Manual Download Page 29

Ki Pro GO File Based Recorder/Player v1.0 29 www.aja.com

 

1.1 Video Input 1

Selects which SDI or HDMI video input will be routed to Ki Pro GO Channel 1.

SDI 1 (default is Ch#)

SDI 2

SDI 3

SDI 4

HDMI 1

HDMI 2

HDMI 3

HDMI 4

Selects SDI 1 input video.

Selects SDI 2 input video.

Selects SDI 3 input video.

Selects SDI 4 input video.

Selects HDMI 1 input video.

Selects HDMI 2 input video.

Selects HDMI 3 input video.

Selects HDMI 4 input video.

1.2 Audio Input 1

Selects the audio input for Channel 1. You can select the first two channels of 

embedded audio from the incoming video signal, or the Ki Pro GO's XLR Analog 

Input connectors.

Follows Video (default)

Analog

Selects embedded audio from the incoming video signal.

Selects audio

2.0 - 4.2 Channel 2, 3, and 4 Input Settings

Same settings above for Ki Pro GO Channels 2, 3, and 4. 

•  2.0 - 2.2 = Channel 2 menu numbers
•  3.0 - 3.2 = Channel 3 menu numbers
•  4.0 - 4.2 = Channel 4 menu numbers

5.0 Loss of Video

Controls Ki Pro GO behavior if the video routed to a channel is lost during 

recording. This setting affects all five channels. Video loss will be detected and 

an alarm message will be posted indicating that input video has been lost on 

specific channels. 

Record Last Frame (default)

Record Black.

The last good video frame is passed through the codec and 

continues to be recorded as a still image.

Black will be recorded if video is lost.

6.0 SDI Monitor Channel

Controls which channels are displayed on the SDI Monitor output.

Channel 1

Channel 2

Channel 3

Channel 4

All Channels (default)

Display only Channel 1.

Display only Channel 2.

Display only Channel 3.

Display only Channel 4.

Display all four channels in quadrants.

6.1 HDMI Monitor Channel

Controls which channels are displayed by the HDMI Monitor output. Select from 

the same settings listed above.

Summary of Contents for Ki Pro GO


































































Reviews:

No comments