en
16
17
METHOD 3: DIRECT KEY IN MEMORY ADDRESS
1.
Press the
VM
button to enter the memory mode.
2.
Press the numeric keys
0-9
to enter the memory address directly, and then
press the button ( ) to confirm.
The auto scan function will store all the available stations in the ETM memory.
Notes:
•
If the display shows
“
- - - -
”
symbol after entering the number, it means that the
entered memory address does not exist.
LISTENING TO STORED STATIONS
DELETE MEMORY
Press the
VM
button, and the
“Memory address”
will flash in the upper right corner of
the screen. Then use one of the following methods to remove unwanted stations:
METHOD 1: DELETE A SINGLE MEMORY MANUALLY
METHOD 2: SEMI-AUTO DELETE MEMORY
METHOD 3: MANUALLY DELETE ALL MEMORY WITHIN THE BAND
Turn the
TUNING KNOB
to select the
memory you want to delete, press and
hold the [
DELETE
] button until the
word “
dEL
” and
“memory address”
flash; then press the [
DELETE
] button
to erase the unwanted station from
memory.
Press and hold the
VM
button until
“
PRESET
” flashes to automatically
search for stored stations, press the
[
DELETE
] button at any time to directly
delete unwanted memory; The radio will
continue searching until you press any
other button to stop this function.
Press and hold the [
DELETE]
button
until the word “
ALL
” flashes in the
upper right corner of the screen, then
press the [
DELETE]
button to erase all
memory within the selected band.
1.
Press and hold the
POWER
button until “
SLEEP
” and
“
ON
” or
1~120”
show on
the display.
2.
Rotate the
TUNING KNOB
to select the sleep timer
from
1
to
120
minutes or
permanently select “
ON
”,
then wait until the radio
turns on automatically to
confirm the setting.
Notes:
•
If the
TIME
button has not been pressed again within 3 seconds, the unit will
automatically confirm the setting.
•
You can also directly key-in the number to set the clock after pressing and hol-
ding the
TIME
button, this allows the user to set the time by pressing the numeric
keys, then you will hear a prolonged beep sound suggesting that the time has been
set.
For example, to set the clock to 6:35, just enter 0 6 3 5
.
SLEEP FUNCTION
CLOCK SETTING
1.
Press and hold the
TIME
button until hours
flashing, then rotate the
TUNING KNOB
to adjust
the hour.
2.
Press the
TIME
button,
then rotate the
TUNING
KNOB
to adjust the
minutes while minutes are
flashing.
The auto scan function
will store all the
available stations in the
ETM memory.
3.
Press the
TIME
button to
confirm the setting.
