53
52
Shortcut for enabling/disabling the
auto answer function:
There is a simple method to enable/disable
the auto answer function:
• Just press and hold
for one second or
longer in the standby mode, or when an
incoming call arrives and PT-H99 starts
ringing.
• Pressing and holding
again to disable
the function.
Hints:
• To disable the auto answer function,
select “ANSWER OFF” in step 2 and
press F/SELECT.
• In step 2, you can also use the numeric
button.
1: ANSWER ON
3: ANSWER OFF
You do not need to press F/SELECT in
step 3.
• In step 3, you can also use the numeric
button.
1: DEFAULT MSG
3: ORIGINAL MSG
You do not need to press F/SELECT in
step 4.
• In step 4, you can also use the numeric
button.
1: SPEAKER ON
3: SPEAKER OFF
You do not need to press F/SELECT in
step 5.
Enabling the auto answer function
When you are at the wrong time, you can enable this function so that the answer message
is played and record the calling party’s message. You can also record your own answer
message instead of the fixed answer message (See page 54), and set the time to play the
answer message after an incoming call arriving (See page 56).
To enable the auto answer
function:
1
In standby mode, or during
communication, press
,
, and
successively.
2
Turn the Easy Shuttle to select
“ANSWER ON”.
3
Press
, and turn the Easy
Shuttle to select the answer
message type.
This step is skipped unless the original
message is not recorded.
DEFAULT MSG: Default message
ORIGINAL MSG: Original message
4
Press
, and turn the Easy
Shuttle to select the speaker
setting.
If you select “ON”, you can hear the
answer message when an incoming call
arrives.
5
Press
, and confirm your
setting.
The normal display returns after a few
seconds.
*PT-H99(AH)_04E
01.10.11, 9:14 PM
52-53
