Other information
31
GB
Messages
Message
You must log on as the
administrator for
installation.
You cannot install in
this version of
Windows.
You have to install
Music Transfer in
advance.
The player cannot be
recognized.
The writing to a player
failed.
An unexpected error
occurred.
Firmware recovery
cannot be performed.
Update the firmware
from the menu of
Music Transfer.
99 playlists already
exist. You cannot
create any more
playlist.
Meaning
It is going to perform
installation/recovery, without
having as the Administrator.
You cannot install because of
the version of Windows which
is not supported.
It is going to perform recovery,
without having Music Transfer
Hard Disk Player Edition
software installed.
A message when failed
recovery: The player is not
connected to your computer
securely.
A message when failed
recovery: The folder/file
deletion in the player failed.
A message when failed
recovery: Displayed the cases
other than the above.
Firmware cannot be updated.
Displays when
[Create
Playlist] is pressed where there
are 99 Playlists.
Remedy
You have to log on as the
Administrator (page 8).
Make sure that the operating
system you are using is
compatible with Music Transfer
Hard Disk Player Edition (page 7).
Install Music Transfer Hard Disk
Player Edition software.
• Connect the player to your
computer securely.
• Make sure that the power of the
player turned on.
Recover the firmware of the player
again. If an error message appears
even after you have recover the
player, format the player’s hard
disk.
Before you format the player,
make sure about the handling of
data.
Recover the firmware of the player
again. If an error message appears
even after you have recovered the
player, install the Music Transfer
Hard Disk Player Edition again.
• Recover the firmware of the
player using supplied CD-ROM.
• Click [Tools] - [Firmware
Update] to update the firmware
of the hard disk player.
Up to 99 Playlists can be created
and stored in the player.
Create after deleting some
Playlists first.
(Continued)
