Aiwa ALP40P, Instruction Manual

Page: 8 / 23

Note: This does not apply for ceiling mounted projectors.To adjust the vertical angle
of the image, adjust the Height Adjustment Peg on the bottom of the projector as
shown. Turn this Peg clockwise or anticlockwise to adjust the vertical angle.
Adjust The Focus And Keystone
Follow below picture to adjust the focus and trapezoidal screen.
Adjust the focus by turning the knob while
observing the image pixels near the center of the
screen. Optimal focus is obtained when the
pixels are clearly visible. Depending on the
projected screen size, the focus near the screen
edges may be less sharp than the screen center.
Keystone image is created when the projector
beam is projected to the screen in an angle.
Keystone correction will restore the distorted
image to a rectangular or square shape.
7
SCREEN
PROJECTOR
Height Adjustment Peg
FOCUS ADJ. KNOB
Then sharpen the image
by rotating focus knob.
TRAPEZOIDAL ADJ. KNOB
Vertical Angle