Shenzhen Aituo Automation Device Co.,Ltd
18
Picture 1
2
Turn off the solder gun temperature control panel,check the position of solder wire whether
under the bottom center of the solder iron head.
（
refer to the picture2
），
If there is any deviation,
you may need to adjust the fixed feeding tin nut, then adjust the position (refer to picture3)
（
Note:after debugged,pls according to the third steps,second step,first step to return back,don’t
wrong order,otherwise harm the soldering gun
）
Check the solder
wire is enough
First step,press the button to make
the solder station forward.
Second step:Press the
button to make the
gripper move down.
Third step:Press the button
to move the solder station
down,and check the solder
wire position of the bottom
center of solder iron,if not
according to the picture 3.
