Shenzhen Aituo Automation Device Co.,Ltd
16
3
、
Q:How to adjust when the knife can’t cut the wire on the cutting workstation?
A:
The solution as follow:
1
Check the top and bottom knives of cutting parts are broken,if yes,pls change.when fixing the
new knife,make sure the position as the same.
2
Refer to the follow picture,check whether a good coincidence between up and down knife of the
cutting face,if no,it needs to add sheet piece to reach the coincidence.
Cables
Adjust clamp
board nuts
Adjust press
wire parts nuts
Adjust clamp
piece nuts
Bottom knife cutting face
Up knife cutting
face
Need to be
coincidence
