Aisin YOSHI AWS E1J TWIN, Installation Manual, Page: 43 / 60

43
8.1 Controller Plus: Control Panel and Probe Temperature Buffer Tank
8.1.1 Control panel
Control panel for the remote management of the AWS with which is possible to control and
management of a single module from a remote location. The shielded cable connecting the panel
to the module has a maximum length of 60 meters.
The panel allows you to control and modify the operating parameters of the module (for details
regarding the management of the module with the remote control panel, refer to the AWS "service
manual").
8.1.2 Probe temperature buffer tank
The probe is used to stop the pump when the AWS reaches the set point temperature. It must be
installed on the tank and connected to the AWS as shown in the drawing.
8.2 External probe temperature
The probe allows adjustment of the flow temperature of the water according to the temperature of
the outside air by means of a 4-20 mA current signal.
AWS TERMINAL BLOCK
ASIT ACTIVE PROBE
(BUFFER TANK)
BUILDING MANAGER
(THERMO MANAGER OR EQUIVALENT)
OUTSIDE TEMP.
ACTIVE PROBE
OPTIONAL
CONTROL PANEL
POWER SUPPLY 12 V AC
POWEER SUPPLY 12 V AC
AWS – CONTROL PANEL
COMMUNICATION
Jumper position on terminal block
for 4..20 mA current output
8 AWS Accessories