USE OF WIRELESS REMOTE CONTROL
WIRELESS REMOTE
CONTROL PUTS ALL
FUNCTIONS AT YOUR
FINGERTIPS
●
Aim at the infrared signal receiver on the room air conditioner when operating.
●
The remote control signal can be received at a distance of up to about 8 m.
●
Be sure that there is nothing between the remote control and the signal receptor.
●
Do not drop or throw the remote control.
●
Do not place the remote control in a location exposed to direct sunlight, or next to a
heating unit, and/or other heat source.
●
Do not expose the air conditioner signal receiver to a strong light such as fluorescent
lamp or sunlight
REMOTE CONTROL BATTERY CHANGE
●
Remove the batteries from the remote control as shown.
●
Use two 1.5 volt size AAA batteries
●
Perform reset operation by pressing buttons (9), (10), (13), (14)
6
Prior to operating your air
conditioner, make sure that:
PRIOR TO
OPERATION
●
The
unit is properly
plugged into the electrical
socket.
●
Stand bu Indicator (A) on the
unit's display is lit, meaning
that the air conditioner is ready
to accept your remote control
command.
●
The red tap protecting the
remeote control batteries has
been removed.
●
For clock setting, see page 11.
Use the remote control holder
when unit is not in use.
REMOTE CONTROL
HOLDER (DESK TYPE)
Remote control can be slipped
in or out its holder.
RCA INST MANUAL
