4
Air Flow Adjustment
With this air conditioner, three air directions can be
obtained as shown in the figures below. When the
air flow direction is set, adjust to the desire sweep
angle.
Air Circulation
An adequate flow of air is very important for comfort. When the
SELECTOR knob is set at “FAN” position, the fan only is adjusted so
that the air is filtered and circulate without cooling effect.
If desired, it is possible to expel room air.
Air circulation only without cooling effect may also be achieved with
the THERMOSTAT knob turned counterclockwise to “1” position and
with the SELECTOR at “MED COOL” or “LOW COOL”
Adjust sweep angle.
When the selector lever is moved to the right or left,
the sweep angle increases or decreases. Adjust
the sweep angle within AIR SWING ZONE range.
AIR CIRCULATION
AIRFLOW DIRECTION ADJUSTMENT
Note:
When the select lever is returned to the “NEUTRAL”
the vertical louvres do not normal operate. If the
select lever is returned to the “NEUTRAL” in error,
readjust the sweep angle and refering to “Adjusting
Air Flow Direction and Sweep Angle”.
SELECTOR
Turbo
Cool
Low
Cool
Med
Cool
Fan
Off
Note:
Setting the vertical louvre at high room humidity
1. Set the AIR SWING switch to ON.
2. Or, to use the AIR SWING switch to OFF,
set the switch to OFF when the vertical
louvre moves to the centre.
Air Conditioner
Room
Right Side
Air Conditioner
Room
Central
Air Conditioner
Room
Left Side
RCA INST MANUAL
