5
1. Move the select lever fully left to the NEUTRAL”.
2. Position the vertical louvre approximate at the centre
and move the select lever fully to the right end of the
AIR SWING ZONE.
3. Set the AIR SWING switch to “ON”. The vertical
louvres start rotating with the maximum sweep angle.
Note: if the SELECTOR knob is set to “OFF”, set to
other position.
4. The sweep angle can be adjusted within the AIR
SWING ZONE range. When the select lever is
returned to the left, the sweep angle decreases.
Adjust sweep angle according to preference.
Note: If the select lever is returned to the “NEUTRAL”
in error, the vertical louvres do not function
properly. In this event, carry out the procedure
from the beginning.
1. Move the select lever fully left to the NEUTRAL”.
2. Lightly move the vertical louvres to the left until they
stop and move the select lever fully to the right end of
the AIR SWING ZONE
3. Set the AIR SWING switch to “ON”. The vertical
louvres start rotating with the maximum sweep angle.
Note: if the SELECTOR knob is set to “OFF”, set to
other position.
4. The sweep angle can be adjusted within the AIR
SWING ZONE range. When the select lever is
returned to the left, the sweep angle decreases.
Adjust sweep angle according to preference.
Note: If the select lever is returned to the “NEUTRAL”
in error, the vertical louvres do not function
properly. In this event, carry out the procedure
from the beginning.
1
ON
OFF
AIR SWING
AIR SWING ZONE
Stop at the centre
ON
OFF
AIR SWING
AIR SWING ZONE
To direct air flow to the centre
ON
OFF
AIR SWING
AIR SWING ZONE
To direct air flow to the left side
Move to the left
ON
OFF
AIR SWING ZONE
AIR SWING
3
RCA INST MANUAL
