1-2
INTRODUCTION
SM YBD018 1-A.1 GB
1.3 Indoor
Unit
The indoor unit is wall mounted, and can be easily fitted to many types of residential and commercials
applications.
Feature
Delta DCI
LEX/HAD DCI
DNG DCI
SLS DCI
CN DCI
PXD DCI
Display
LED
LCD
LED
LED
LED
LED
Ionizer
NO
YES
NO
NO
NO
NO
ESF
NO
YES
NO
NO
YES
NO
Indoor fan motor
Variable speed
(PG)
Variable speed
(PG)
Variable
speed (PG)
Variable
speed (PG)
DC
Variable
speed (PG)
Horizontal motorized
louver
YES
YES
NO
NO
YES
YES
Vertical motorized
louver
NO
YES
NO
NO
NO
NO
Heating element
NO
NO
NO
NO
NO
NO
M2L Cable port
YES
YES
YES
YES
YES
YES
Dry contact
Presence
detector
or (jumper
selected)
power
shedding
1.4 Control
The microprocessor indoor controller, and an infrared remote control, supplied as standard, provide complete
operating function and programming.
Remote control RC4 RC7
For further details please refer to the Operation Manual, Appendix A.
Remote control RC 8:
Execpt the same nominal function as RC7, it also can be used to realize the function of diagnostics tests for
the technician convenient use. (Both select SPT+ and SPT- to enter or escape the diagnostic mode)
For further details please refer to the Control system
.
1.5 Outdoor
Unit
The outdoor units can be installed as floor or wall mounted units by using a wall supporting
bracket. The metal sheets are protected by anti- corrosion paint work allowing long life
resistance. All outdoor units are pre-charged. For further information please refer to the Product
Data Sheet, Chapter 2.
It includes :
Compressor mounted in a soundproofed compartment :
•
Axial fan.
•
Outdoor coil with hydrophilic louver fins for RC units.
•
Outlet air fan grill.
•
Interconnecting wiring terminal block.
•
1.6 Tubing
Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual.
1.7 Inbox
Documentation
Each unit is supplied with its own installation, operation and remote control manuals.
