3
3
- 68
Control of 3-WAY FLOW LOGIC
5. Schedule Timer / NWTM-FL
■
■
How to Check Program Times
You can check the programmed times for each group and day of the week.
STEP 1
Press the GROUP button and select a group whose
time you want to check.
NOTE
•
•
•
•
•
•
Group selection is disabled depending on
installation conditions. If so, proceed to the next
step.
STEP 2
Press the DAY button.
When the DAY button is pressed the first time,
tomorrow’s day of the week starts blinking and the
program settings for tomorrow are displayed.
Every time the DAY button is pressed, the program
settings change in order of the days of the week.
Pressing the GROUP button displays the program
settings of another group on that same day.
STEP 3
End checking.
Press the CLEAR button. The normal display
returns.
NOTE
Holding down the CANCEL button for more than 2
seconds also returns the normal display.
04-218 Airwell-3_p61-85.qxp 01/06/2007 13:12 Page 68