8
1.9
1.10
INSTALLATION
Before installing the conditioner, it is essential to calculate
the summer thermal loads (and winter ones for the models
with a heat pump) of the room. The more exact the
calculation, the better the product will work. Please refer to
current regulations to carry out calculations. For large-scale
installations, please call a specialised heat engineer firm.
Therefore, try to reduce higher heat loads by following
instructions below:
- Cover large windows exposed to sunlight with curtains
or with external maskings (blinds, porches, reflecting films,
etc.).
- The room must remain closed for as long as possible.
- Avoid turning on halogen lamps or other high energy
consumption appliances such as small ovens, steam irons,
hot plates etc.).
For the best performance of the appliance and to avoid
malfunctions or dangerous situations, the location of the unit
must meet the following requisites:
- Respect the minimum distances indicated in the diagram.
- The wall on which you intend to anchor the unit must be
robust and able to support its weight.
- Leave enough space around the unit to perform maintenance
operations.
- Nothing must obstruct the air flow both in the top suction
part (curtains, plants, furniture) and in the lower outlet part, as
it could cause vibrations which might prevent the appliance
from working correctly.
The appliance is stated as having an IPX0 protection rating,
therefore it is not suitable for outdoor installation.
Check that there are no structures or systems (beams,
pillars, hydraulic pipes, electrical cables etc.) in the part that
must be drilled.
Never force the air flap open;
The appliance must not be installed directly above another
electrical appliance (TV, radio, fridge, etc.) or above a source
of heat.
INSTALLATION
Installation method
Choosing the position of the unit
Summary of Contents for AW-XDO009-H11
Page 22: ...22...
