19
1.1
EN
MAINTENANCE
MAINTENANCE
Disconnect the unit from the power supply before each
cleaning and maintenance intervention by setting the
main power supply switch to off.
Wait for the components to cool down in order to avoid
any burns.
Pay attention to the sharp edges.
Do not use abrasive sponges or abrasive or corrosive
detergents as you might damage the painted surfaces.
When necessary, clean the external surfaces with a soft
damp cloth.
The air conditioner you have bought has been designed to
keep maintenance operations to a minimum, in fact, they
only include the following cleaning operations:
Clean the air filter after a period of continuous use and
according to the concentration of impurities in the air, or
when you wish to start-up the appliance after a period of
inactivity.
NB: before performing any operation, take care with the hot
and/or sharp surfaces of the metal.
The filter is located in the top part of the appliance.
To extract the filter:
- open the grille and carry out operations 1, 2, 3, then remove
it from its housing;
- extract the filter by lifting it;
- remove the dust from the filter with a vacuum cleaner or
by washing it in running water without using detergents or
solvents and leave to dry;
- put the filters back on top of the coils, taking care to
position them correctly;
- put the grille back in reverse order.
After filter cleaning, check if the panel is properly
mounted.
It is forbidden to use the device without its mesh filter
.
The air conditioner you have bought has been designed to
keep maintenance operations to a minimum, in fact, they
only include the following cleaning operations:
Periodic Maintenance
Cleaning the filters
External cleaning
Summary of Contents for AW-XDO009-H11
Page 22: ...22...
