Airwell AW-TDF Series, Installation & Operation Manual

Page: 146 / 160

0
10
20
30
40
50
60
70
-25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45
Tw
u
[°
C]
Tae [°C]
1
2
2
3
Size 190 300 190S 300S
Ventilation
Type of fan Centrifugal
Air flow m
3
/h 270 414 270 414
Available pressure head Pa 25 45 25 45
Integration
Solar coil surface m
2
- - 1,10 1,30
Solar coil material - - Enamel Steel
bar - - 10 10
Maximum operating pressure
MPa - - 1 1
1. Inlet water temperature 15 °C, accumulator set 45°C, air on source side 15°C D.B /12°C W.B.
2. The product complies with the European Directive ErP, which includes the Commission Delegated Regulation (EU) N. 812/2013 and the Commission Delegated Regulation N.
814/2013, Average Climate, Heat Pump Water Heater
3. The product complies with the European Directive ErP, which includes the Commission Delegated Regulation (EU) N. 812/2013 and the Commission Delegated Regulation N.
814/2013, Warmer Climate, Heat Pump Water Heater
4. The product complies with the European Directive ErP, which includes the Commission Delegated Regulation (EU) N. 812/2013 and the Commission Delegated Regulation N.
814/2013, Colder Climate, Heat Pump Water Heater
5. Data referred to completely ducted unit.
6. Maximum temperature that can be reached during Anti-legionella mode(Dinsifect)
*It contains fluorinated greenhouse gases
Size 190 300 190S 300S
Power supply (1)
V
220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50
F.L.A. - Current absorbed at the maximum allowed conditions A
16 ,10
16,50 16 ,10 16,50
F.L.I. - Power absorbed at full load (at the maximum allowed condi-
tions)
kW
3 , 7 0 3,75 3,70 3,75
M.I.C - Maximum inrush current A
22,2 33,7 22,2 33,7
300 - 300S
1. Use range of the heat pump
2. Use range of the electrical heating element
3. Use range of the electrical heating element only in Anti-Legionella mode
(Disinfect)
Twu [°C] water temperature in the accumulator
Tae [°C] air temperature at exchanger inlet
190 - 190S
Electrical data
1) Power supply 220-240/1/50 Hz
For power voltages other than the standard, contact the Airwell technical department
The units are conforming with the prescriptions of European Standards EN 60204 and EN 60335
Warning: when defining the correct size, verify that all absorption is compliant with current electrical supply
contracts in force in the country of installation
Operating limits