6
Note
: For Win 98 users, the system will ask for Windows 98 CD-ROM after rebooting. Please replace the
supplied CD with the required one and click
OK
to proceed.
Figure 2.1-6: The Message Box of
Insert Disk
in Windows 98 System
h) Then, you shall see the status icon of the
Wireless 11Mbps Configuration Tool
appeared in
the system tray, and the installation is entirely finished at the moment.
To set configurations for the network connection, double-click the
Wireless 11Mbps Configuration
Tool
icon, which should be displayed on your desktop already. For more details about the
application program, please refer to the
Wireless 11Mbps Configuration Tool
Basics
chapter in
this manual.
2.2 Installation Notes- Windows XP
If your current system is running Windows XP, you shall find that two tabs are contained in the
PRISM
Wireless Settings
dialog box after you’ve followed the instructions above and successfully installed
the drivers. However, normally, the dialog box should be consisted of five tabs. This is because
Windows XP has its built-in configuration tool –
Windows XP Wireless Zero
Configuration Service
to assist you in networking activities. It is recommended to utilize the attached
Wireless 11Mbps
Configuration Tool
to enjoy more benefits it will bring. Thus, to employ your
Wireless 11Mbps
Configuration Tool
under Windows XP, please proceed to the next steps to change the default
settings of
Windows XP Wireless Zero
Configuration Service
to
Wireless 11Mbps Configuration
Tool
.
Figure 2.2-1: The
Wireless 11Mbps Configuration Tool
Tray Icon
