- 5 -
7. Attach the hook connector from
the pump to the leash knot.
H O W T O
I N F L A T E T H E W I N G
1. Make sure the area where you want to pump the wing is free of sharp objects,
like rocks and fences.
2. Look for some windshade while pumping up the wing. In case you can’t find an
area with less wind, ask a friend to hold the wing while you pump.
3. Find out the wind direction, unfold your wing by laying it on the ground, struts
facing up with the wind blowing from your back.
4. Make sure the hose clamp on the hose connecting the leading edge to the strut
is open.
5. Make sure the air valve on the central strut is closed.
6. Spread the wing on the floor, make sure it does not have any creases. This allows
the air to flow in without deteriorating the wingtips.
8. Screw the base of the valve clockwise
into the thread on the Leading edge.
Open
Close
