- 6 -
9. Connect the pump nozzle into the
valve of the wing. Turn clockwise
for a better insertion.
10. Inflate to the recommended pressure.
11. Close the hose clamp.
12. Put the harness lines in place using the ties made for this purpose – see
section “How To Tie The Harness Lines”, page 7.
13. Once you have put the leash on, the set up is ready! You can then use the leash
to keep the wing attached to a heavy and secure object while you go to set up
your board and put on your water clothes. Right on!
To close the valve, squeeze the clamp
together while feeling the teeth
ratchet until clamp feels tight.
(Secure floatation in case of leakage)
