Page 29
TR-CTL FWD TRACTION setting range is 1% to 100%. The default
setting is 1%. The TRACTION setting adjusts the hold time before the
servo moves.
traction control
DELAY Setting
1) Press the ENTER key to move the cursor to DELAY, then press the
INC/+ or DEC/- keys to set the desired DELAY value.
TR-CTL FWD DELAY setting range is 0% to 100%. The default setting is
0%. The DELAY setting controls when the servo performs its function.
POINT Setting
1) Press the ENTER key to move the cursor to POINT, then press the
INC/+ or DEC/- keys to set the desired POINT value.
TR-CTL FWD POINT setting range is 5% to 100%. The default setting is
50%. The POINT setting locates the actual point in the servo movement
that you want the Traction Control to deactivate.
Traction Control applies only in the range from Neutral to the POINT
setting position.
[FWD] FORWARD TRACTION CONTROL
Forward Traction Control changes the Traction Control settings when the throttle is moving from Neutral to the High position.
There is no traction control setting for the Brake side..
POINT
(5% to 100%)
Neutral
High
TRACTION Setting
1) Press the Function key to highlight the TR-CTL menu. [FWD] will be
active in the Programming Window and the cursor will default to
TRACTION.
2) Press the INC/+ or DEC/- keys to set the desired TRACTION value.
ACT/INH Setting
1) To use the TR-CTL FWD function, it must be Activated. Press the
ENTER key to move the cursor to TR-CTL, then press the INC/+ or
DEC/- keys to either ACT (Activate) or INH (Inhibit) the TR-CTL FWD
function.
The TR-CTL FWD ACT/INH setting can be assigned to any Push-Button switch, using the Key Assign function. See page 50
for more information. By using this function, switching Traction Control 'ON' or 'OFF' can be selected during model operation.
Increasing the TRACTION percentage, combined with the DELAY
percentage creates a stepped acceleration through the servo's
movement up to the POINT setting.
Summary of Contents for M11X FHSS-3
Page 1: ...Page 1...
Page 67: ...Page 67 notes...
