En-15
(2) Others
Indication pattern
Indicator Name
Indication pattern
OPERATION indicator lamp (Green)
Function number; tens place (0.5s ON/0.5s OFF)
TIMER indicator lamp (Orange)
Function number; ones place (0.5s ON/0.5s OFF)
FILTER indicator lamp (Red)
Setting number: (0 to 9) (0.5s ON/0.5s OFF)
(Example) Function : 31, Setting number : 2
OPERATION
indicator lamp
(Green)
TIMER
indicator lamp
(Orange)
FILTER
indicator
lamp (Red)
11 sec
10 sec
9 sec
1 cycle 12 sec
ON
OFF
0.5s 0.5s
0.5s
0.5s
0.5s
0.5s
0.5s
0.5s
0.5s
0.5s 0.5s 0.5s
ON
OFF
ON
OFF
8. MOUNT THE COVER PLATE AND THE INTAKE
GRILLE
]1
8.1. Handling for the pipe take-off part
When the pipe is pulled out in the direction shown in the
fi
gure below, cover the take-off
part with material (putty or the like) that will block it off.
UNDER CEILING TYPE
Top
Right
Rear
FLOOR CONSOLE TYPE
]1
8.2. Mount the cover plate (Right)
(1) Cut a pipe exit hole in the right plate. This is only when the pipe exits from the right
side. (This operation is not required when the protrusion is on the top or rear.)
Cover plate (Right) (Accessories)
(2) Join the cover plates (right) and mount with screws.
Tapping screw (M4 × 10 mm)
(Accessories)
]1
8.3. Mount the cover plate (Left)
(1) Join the cover plates (left) and mount with screws.
Tapping screw (M4 × 10 mm)
(Accessories)
Cover plate (Left)
(Accessories)
8.4. Mount the intake grille
(1) Cut the right side of the intake grille. This is only when the pipe exits from the right
side.
(2) Insert the hinges on the bottom of the intake grille into the holes in the base assem-
bly. Then mount the arms to the 3 areas on the top of the intake grille.
9367701094-02_IM.indb Sec1:15
9367701094-02_IM.indb Sec1:15
12/29/2011 10:50:42 AM
12/29/2011 10:50:42 AM
