En-10
]1
6.4. Connection of wiring
(1) Remove the electric component box.
Electric component box
Electric component box
RFM
CAUTION
Do not remove the RFM
fi
xing screws. If the stays are removed, the electric component
box will fall.
If you use as “Floor console”, you must remove screws and RFMs (2 position).
When removing the electric component box, remove the clamp from the cables.
After completing the work, fasten the cables as they were originally by installing the clamp.
Cables
Clamp
Remove the clamp.
Install the clamp.
(2) Pull out the electric component box.
Electric component box
(3) Remove the electric component box cover.
Remove the 3 tapping screws.
Electric component box cover
Base
CAUTION
Be careful not to pinch the lead cables between the electric component box and
base.
(4) Wiring
* When there is 1 transmission cable or remote controller cable, fasten it the same way
as shown in the
fi
gure with a binder (medium).
For U.S.A. and Canada
Binder (Medium)
(Accessories)
Conduit
(L1, L2 (N): Power supply cable)
GND
Lock nut
Remote controller cable
Y1: Red, Y2: White, Y3: Black
X1, X2: Transmission cable
For Others
GND
Binder (Medium)
(Accessories)
Grommet
edging
(Accessories)
L1, L2 (N): Power supply cable
Remote controller cable
Y1: Red, Y2: White, Y3: Black
X1, X2: Transmission cable
]1
6.5. External input and external output (Optional parts)
Controller PCB
Input No Voltage terminal (CN17)
Input Voltage terminal (CN6)
Output terminal (CN16)
9367701094-02_IM.indb Sec1:10
9367701094-02_IM.indb Sec1:10
12/29/2011 10:50:36 AM
12/29/2011 10:50:36 AM
