iRelay 460 Equipment Installation Guide
UGD-D01035
Airspan Commercial and Internal Use
16
For more information, see
Appendix E, Standard Torque Values – Metric System
.
2.3.1.3 Mounting Type B iR460 for Metal Poles Greater than 3.75 inch
Diameter
To install iR460 on large poles (that is, poles with diameter over 3.75 inch), use all brackets parts
except part A and the long bolts.
1. Feed both metal bands through the bracket part B, then fit to the pole. Pull as much as
possible through by hand, and then press down the locking mechanism. Correctly position
the bracket on the pole before fully securing by tightening the metal bands with 10 mm flat
blade screwdriver or a spanner/wrench (16 mm).
Figure 10:
iR460 Mounting Plate
Figure 11
shows the front view of the iR460 mounting bracket installed on a large pole.
Figure 11:
Front View of the iR460 Mounting Plate
2. Slide iR460 into the front slot of the pole bracket.
Figure 12:
Sliding the iR460 Unit