iRelay 460 Equipment Installation Guide
UGD-D01035
Airspan Commercial and Internal Use
14
Item
Quantity
Description
2
1
Mounting bracket back plate (part A)
3
1
Mounting bracket front plate (part B)
4
2
Short bolts for mounting iR460 to the
mounting bracket
The iR460 mounting kit that is designed to enable deployment on a wall or a pole contains:
•
Wall mounting bracket and short bolts
•
Pole mounting bracket part A and long bolts
•
Pole mounting bracket part B and metal straps
2.3.1.1 Mounting iR460 to a Pole
When installing iR460 on a pole, mast, or lamppost, use the pole mount kit included with the iR460
unit. Carefully select the location on the pole allowing enough clearance to align the iR460 to the
desired direction.
The following are the two types of available pole mounting kits:
•
Type A iR460 mounting kit for poles less than 3.75 inch diameter
•
Type B iR460 mounting kit for poles less greater than 3.75 inch diameter
Both contain several parts that you can assemble prior to mounting on a pole. For more information
on how to mount Type A iR460 and Type B iR460, see
Mounting Type A iR460 for Metal Poles Less
than 3.75 inch Diameter
,
Mounting Type B iR460 for Metal Poles Greater than 3.75 inch Diameter
,
and
Mounting Type B iR460 for Wood Poles Greater than 3.75 inch Diameter (TBC)
.
2.3.1.2 Mounting Type A iR460
for Metal Poles Less than 3.75 inch
Diameter
To install iR460 on small poles (that is, poles with diameter up to 3.75 inch), use all brackets parts
except the metal bands.
1. Insert both long bolts into the bracket part A; position on the pole, fit bracket Part B, fit the
washers (form A washer and rectangular lock washer), hand tighten the nut. Position the
bracket in the correct location on the pole before fully securing.
Torque =
Make sure to place part A behind the pole.
Figure 6:
Mounting Bracket
2. Slide iR460 into the pole bracket front slot.