605-0001-801 FlexNET Link Products
case, either the gateway IP address or the IP settings of interfaces of the unit have to be
changed.
Adding a new route
Assign a new route by using the Add Route fields at the bottom of the configuration
screen.
To add a new route
Enter the destination network in the Destination text field, and the associated gateway
and subnet mask in the Gateway and Netmask fields. Click the Add link beside the new
route information.
Default gateway
To set the default gateway, use “0.0.0.0” for both, the Destination and the Netmask.
OSPF & RIP
The ASN-700/800 can also be upgraded to support OSPFv2 (Open shortest path first)
dynamic routing. Additional information and manual for OSPF support is available from
Airspan Networks in ASN-700/800 OSPF-manual and documentation set. OSPF and RIP can
be enabled from the user interface. The actual configuration command line interface can be
used with SSH. Refer to additional information provided in Airspan Networks OSPFv2
routing manual, which is separate document delivered with ASN-700/800/900 products
supporting OSPF routing.
Note: Remember to click on the OK button to apply your changes, and click
Commit Settings to permanently accept the new configuration.
23
Summary of Contents for FlexNET ASN-700
Page 6: ......
