25
ATTACHING CLIP-ON ANTENNA
Warning:
Before attaching the clip-on antenna, ensure that the EasyST is
not
connected to the power source. Do not connect and disconnect antenna while the power is on.
This can cause irreversible damage to the EasyST.
The EasyST is supplied with the clip-on antenna already attached to the EasyST. However, in cases
where it may have accidentally being removed, you can re-attach it by following the procedure
described below.
Note:
Later EasyST models provide a screw for securing the antenna to the EasyST.
To replace the clip-on antenna:
1. Align the clip-on antenna's knob with the EasyST's notch, as shown in the figure below.
2. Gently push the antenna down onto the EasyST so that the MCX and 6-pin connectors plug
into their respective receptacles, and that the antenna's knob sits firmly into the EasyST's
notch.
