19
CONNECTING EASYST TO POWER
EasyST is powered by an AC/DC power supply adapter which supplies the EasyST with 6 VDC and 4
Amperes. The AC/DC adapter is simply plugged into a standard electrical wall outlet (110/240 VAC;
50/60 Hz).
The power adapter provides interchangeable prongs (e.g. American vs. European) that can be
replaced to suit country electrical standards in which the EasyST is being installed. To view the
AC/DC power adapter specifications, see AC/DC Power Adapter Specifications.
Note:
Any AC/DC power adapter complying with Class 2 and LPS, and safety approved
according to national regulations, and that provides rated input of 100-240 V, 50/60 Hz, 0.4 A
and output of 6 V, 4 A DC, may be used for powering the EasyST.
Changing the AC/DC Power Adapter's Prongs
The AC/DC power adapter provides interchangeable prongs to suit electrical wall outlet sockets in
the country in which the EasyST is being installed.
To change the plug prongs:
1. Remove the prongs by first moving (with the help of a pen) the
LOCK/OPEN
switch to
OPEN
position, and then gently sliding the prongs upwards, away from the power cord.
2. Align the desired prongs with the adapter's prong groove, and then slide the prongs onto
the adapter in the orientation as shown in the figure below. Ensure that the prongs reach
the end of the prong groove.
3. Secure the prong in place by moving (with the help of a pen) the
LOCK/OPEN
switch to
LOCK
position.
Connecting EasyST to AC/DC Power Adapter
After you have attached the plug prongs suitable to your country's electrical wall socket, you are
ready to connect the EasyST to the electrical wall outlet.
