AirHarmony-4400 (External Cavity Filters) Installation Guide
UGD-D01186
Airspan Commercial and Internal Use
33
Figure 22: Tighten filter bridge screws on Sun-Shield
14.
Swing the filters’ cover up till slots are aligned with the two (2) upper bolts on the filter
bridge.
15.
Once in place tighten all four (4) screws to lock the filters’ cover in place.
Figure 23: Tighten screws on cover
Note:
The changing or replacing of the external filter sets will require a dismantling of
the AirHarmony 4400 from its mounting position to perform this change or replacement.
4.3
Connecting the GPS Antenna
After assembly of the External Filters set, the GPS antenna should be connected and it is
recommended that the connection should be weather-proofed.
The following describes the connection of the GPS antenna which is installed directly to the top of
the unit.
