Please take a few minutes to read over this manual and its accompanying documents.
Before power-up of the unit, inspect it for any damage that may have been sustained during shipping.
DO NOT USE DAMAGED EQUIPMENT. If you suspect this unit was damaged during shipping, contact AirScape
technical support by phone at 1.866.448.4187, or email at
.
THEORY OF OPERATION
AirScape’s HEPA Tower was designed to greatly minimize exposure to airborne pathogens, pollen and
dust by quietly filtering the air in the room.
The design intent was to create a mobile HEPA filter unit that would quietly filter any room, work space,
office space, conference room or waiting room to minimize the airborne transmission of viruses, viral
particles, and removal of pollen, fungal spores and dust, that can accumulate in indoor air.
This stand alone unit recirculates and filters the air (HEPA=99.95%) in the space it is being used.
It works by pulling in contaminated air from low in the room and pushing the air up high thus creating an
airflow pattern [high to low] that reduces human exposure to contaminants.
PURCHASE OPTIONS (not included)
A wireless remote is an available accessory option for AirScape’s HEPA Tower. The wireless remote is
NOT included as part of this fan’s standard control package. The yellow manual included with these
accessories provides specific instructions for the installation and operation of the remote.
If purchased
, the wireless remote receiver is connected to the fan electrical box at the blue RMT RJ45
port. If purchased at the time of the purchase of the HEPA Tower, AirScape will install the remote
receiver in the unit. If purchased after; Installation means removal of the rear panel, installation of the
remote receiver and blue Cat5E cable, an operational test and reinstalling the rear panel.
Replacement HEPA Filter and MERV11 Pre-filters can also be purchased
SAFETY INFORMATION
•
The HEPA TOWER does NOT remove gasses.
• The HEPA TOWER is not for use in professional kitchens.
• Before servicing the Tower, unplug the fan from the wall receptacle
to reduce the risk of damaging
circuit boards, fire, electrical shock, or injury.
•
A used HEPA Filter should be treated as “infected” or contaminated and discarded taking
precautions. Avoid touching the filter material.
• Perform periodic checks of the air flow pattern, physically feel air moving in and out of the HEPA
Tower and around the room.
• When installing a new HEPA Filter avoid touching the filter material as this may damage (create a
hole in) the HEPA Filter and thus nullify the HEPA standard.
• Strapping the unit to the wall using a few Rear Panel (access panel) screws is a good way to create
some earthquake protection. (straps not included)
HEPA TOWER Installation and Operation Manual, 0221
©AirScape, Inc., 2021. All Rights Reserved. Page 2
