background image

3

Safety Instructions

Insert the power plug into the outlet for 115V / 60Hz only. 

When inserting the power cord into the outlet, turn off the switch before use. 

Do not touch the product with a wet hand.

Do not put a heavy thing on the power cord. 

When water enters into the product or the electricity part, pull out the power plug 
and dry it completely before use.

On the day of thundering or lightning, remove the power cable, and do not use it.

Do not put the product at the humid place. It may occur a danger such as electric leak
or electric shock.

Do not install it at the place where inflammable gas is generated. 
It may occur a danger of explosion. 

Remove any obstacle at the inhaling hole and the exhaling hole. 

When cleaning the surface of the product, pull the power cord out, and use soft cloth
for preventing a scratch.

Do not use wet cloth, wax or thinner.  

Do not put a hand or foreign substance into the inhaling hole or the exhaling hole. 
It may occur a malfunction to the product or a physical injury. 

Keep this manual in a visible location near the cooler for easy reference.

The following instructions are for ensuring the user’

s safety and to prevent any 

physical injury or material damage. Please read carefully and follow all instructions.
There are two sections to these instructions: WARNING and CAUTION.

CAUTIONS

Specification

Voltage

115Va.c. 60Hz

Width

28.5 (inch)

Length

30 (inch)

Height

30 (inch)

Weight

132lb

AirFlow (High)

1,620CFM

AirFlow (Low)

1,410CFM

Summary of Contents for HSC-HEPA2000









Reviews: