ENGLISH
Cod. 2200772300 00 - Edition 04/2003 - 67
20.0 STARTING UP
BEFORE CARRYING OUT ANY OPERATION ON THE MACHINE, ENSURE THAT THE ELECTRIC POWER SUPPLY
HAS BEEN DISCONNECTED.
20.1 PRELIMINARY CHECKS
Check the oil level Ref. 1 Fig. 23; when delivered the machine is filled with oil; if the oil level is not as intended, top up
with the same oil as the original type.
If more than 3 months have passed between the inspection in the factory and the date of installation, lubricate the screw
group before starting up, following the procedure described below:
- Remove the protection Ref. 2 Fig. 23
- Remove the fixed protection device (machine cover) Ref. 3 Fig. 23.
- Remove the cover Ref. 4 Fig. 23
- Remove the air filter Ref. 5 Fig. 23
- Pour a little oil into the suction unit.
- Reassemble the air filter Ref. 5 Fig. 23
- Reassemble the cover Ref. 4 Fig. 23
If more than 6 months have passed between the inspection in the factory and the date of installation, consult
the manufacturer.
20.2 STARTING THE DRYER
Start the dryer before turning on the compressed air.
The compressed air piping will be free of condensate only by doing so.
The dryer must be kept running during all the time the air compressor is running.
WARNING:
if the dryer is switched off,
before starting it again, wait at least 5 minutes in order to allow the pressure balancing.
FIG. 23
3
5
4
1
Oil
2
DO NOT EXCEED THE
MAXIMUM LEVEL.
MAXIMUM LEVEL
DURING OPERATIONS.
MAXIMUM
LEVEL WITH
THE MACHINE
OFF.
MINIMUM LEVEL
WITH THE
MACHINE OFF.
Summary of Contents for COMBI DRY BASIC 3
