background image

For us, it’s not just business. It’s personal.

63 Morrow Road, Barrie, Ontario, Canada L4N 3V7   Phone: 1-800-668-8448   Fax: (705) 721-8646   www.omegacompressors.com

AIR COMPRESSOR – OIL LUBRICATED

OPERATING INSTRUCTIONS

PLEASE READ THIS MANUAL BEFORE INSTALLING OR USING YOUR AIR 

COMPRESSOR UNIT. IT CONTAINS VALUABLE INFORMATION THAT WILL HELP 

YOU IN THE RECEIVING, INSTALLATION, USE, AND MAINTENANCE OF THE UNIT.  

KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE.

COMPRESSOR IDENTIFICATION

Please fi ll in the appropriate information in the spaces provided below. These numbers will allow us to correctly 
identify your compressor in the event you need service or parts.

UNIT MODEL NUMBER: _____________________________________________________________  (i.e. TK-5080V)
(Located on Base of Air Receiver or Air Receiver – White Label)

UNIT SERIAL (MFG.) NUMBER: ________________________________________________________ (i.e. OC-4963)
(Located on Base of Air Receiver or Air Receiver – White Label)

PUMP MODEL NUMBER: ________________________________________________________________ (i.e. TK-50)
(Located on Front or Side of Compressor Pump)

PUMP SERIAL NUMBER: _______________________________________________________________ (i.e.  23045)
(Located on Front or Side of Compressor Pump – Professional Series Compressor Pumps do not have 
Serial Numbers)

ELECTRICS: ___________________________________________________________________ (i.e. 230V/60Hz/1PH)
(Located on Nameplate of Motor)

COMPRESSOR DISTRIBUTOR ______________________________________________________________________
(Who You Bought the Air Compressor From)

Summary of Contents for 23045













Reviews: