®
Before using your MedPro AirPort™
Portable Nebulizer System, always
ensure that all parts are clean, as later
described in this manual.
1. Remove top cover and mouthpiece
from the unit.
2. Rotate the nebulizer chamber
assembly counter-clockwise to
detach it from the unit (figure 1-1).
3. Loosen and pull up the nebulizer
cap to separate from the nebulizer
chamber assembly. Remove the
micronization cone (figure 1-2).
4. Ensure that the air filters are in
place (see "Care and Maintenance"
for filter replacement procedure).
Carefully pour the prescribed drug
into the nebulizer chamber, making
sure not to fill over the lower line
(figure 2). If the dose to be inhaled
is larger than 7 ml, it should be
divided into several separate
inhalations.
5. Insert the micronization cone into
the nebulizer chamber and put on
the nebulizer cap (figure 3-1).
6. Attach the nebulizer chamber
assembly to the unit by clockwise
rotation, making sure that it is
properly secured in place (figure 3-2).
SETUP INSTRUCTIONS
8
Figure 1-1
Figure 1-2
Figure 2
Do not
fill over
this line
Figure 3-2
Figure 3-1
